Building with Weatherproof

Prior to Installation

Ensure that all Weatherproof products are stored in a dry environment prior to installation and away from excessive moisture prior to minimise the potential of on-site degrade
Store all Weatherproof products flat and evenly supported along the full length when stored
The Weatherproof range is manufactured from radiata pine and works easily with traditional building tools.

Installation and Fixing Selection

Refer to the Woodhouse Weatherproof Span Tables and Technical Guide in the Literature Downloads section for concise technical and product usage data.
For all construction issues not covered in the Span Tables, refer to the Building Code of Australia or your local building authority for additional installation and application information.
The LOSP treatments used in the Weatherproof range are non-corrosive with conventional fixings that have been classified as hot dipped galvanised.
When cutting, drilling and processing any timber products in the Weatherproof range, ensure that you wear personal protective equipment including gloves, mask and goggles.

Disposing of Offcuts

All Weatherproof off-cuts or shavings should not be incinerated/burnt in open fires or barbecues, or used in gardens or landscaping. Direct all unusable material towards normal household or building site waste disposal.